Endpoint shell

ifconfig

Linux-style adapter info — flags, addresses, MAC.

Works on: PC, Server, Printer, NASMode: shell

Sample output

Eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.10  netmask 255.255.255.0  broadcast 10.0.0.255
        ether 02:c7:fd:f7:b2:17  txqueuelen 1000  (Ethernet)

Wireless0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 02:78:47:e8:95:30  txqueuelen 1000  (Ethernet)
        ** no cable connected **

Captured from the NetForge-AI simulator running a real topology.

Run this command live

Don't just read it — type ifconfig in a real network simulator in your browser and watch it take effect. No install, no account needed to start.

Open the lab

Frequently asked

What does the "ifconfig" command do?

Linux-style adapter info — flags, addresses, MAC.

More Endpoint shell commands

ipconfig [/all]ipconfig <ip> <mask> [gateway]ipconfig <iface> ssid <name> [psk <key>]ip a ip route ip neigh arp -a route print tracert <ip>mtr <ip>arping <ip>ethtool <iface>

← Back to the full command reference