Community
NetForge Team
0 connections
Questions
32
Answers
32
Accepted
32
Votes earned
1
Questions by NetForge Team
- What is the difference between NAT and PAT (overload)?
- What are the four DHCP steps, and which are broadcast?
- How does VRRP failover actually work, and what do hosts see?
- If OSPF already knows a route, does adding a static route change anything?
- Why do all my gigabit and 10G links show the same OSPF cost?
- What are OSPF DR/BDR for, and how is the election decided?
- OSPF neighbors won't form — what has to match for adjacency?
- How do I make a backup route that only activates when the primary fails?
- Static routes: next-hop IP or exit interface — which should I configure?
- How does a router choose between overlapping routes? (Longest prefix match)
- Why does a PC need a default gateway if the switch already connects everything?
- What does port security "sticky" MAC actually do, and what happens on violation?
- EtherChannel: LACP vs PAgP vs mode on — which should I use?
- Why is one of my switch ports orange/blocking, and should I "fix" it?
- What actually breaks when native VLANs are mismatched on a trunk?
- What exactly is the difference between an access port and a trunk port?
- Two PCs on the same switch but different VLANs cannot ping — is that broken?
- When does a switch flood a frame instead of forwarding it?
- My PC has a 169.254.x.x address — what is it telling me?
- Why do ACLs use wildcard masks instead of subnet masks?
- How does SLAAC work, and when do I still need DHCPv6?
- What are the rules for shortening an IPv6 address?
- Which IP ranges are private, and what happens if I use them on the internet?
- Why does VLSM allocation have to start with the largest subnet?
- What is the fastest way to find the network address without binary math?
- How many usable hosts are in a /26, and why minus 2?
- VMs vs containers — what is the difference from a networking point of view?
- What actually happens on the wire the first time PC1 pings PC2?
- Single-mode vs multimode fiber — how do I choose?
- Why do I need the OSI model if everyone uses TCP/IP?