Private addresses, special blocks, and NAT preview
RFC 1918 private space, link-local, loopback, multicast, and broadcast — when each is used, and a brief preview of NAT/PAT (covered in depth in Module 5, Running the Network).
What you'll learn
- Identify the three RFC 1918 private ranges.
- Recognize loopback, link-local, multicast, and TEST-NET addresses.
- Explain at a high level why private addresses require NAT to reach the public Internet.
RFC 1918 — the addresses you can use freely inside
IPv4 has about 4.3 billion addresses, and the free pool ran out years ago. RFC 1918 (1996) answered part of the problem by reserving three blocks that any organisation may reuse internally without asking anyone. Millions of networks use the same 10.0.0.0/8 addresses at once, which works as long as none of them expects the public Internet to route those addresses.
These ranges are not routable on the public Internet. Anyone may use them inside their own network. To reach the Internet, the boundary router translates private addresses to a public address using NAT.
| Range | Prefix | Total addresses |
|---|---|---|
| 10.0.0.0 – 10.255.255.255 | 10.0.0.0/8 | 16,777,216 |
| 172.16.0.0 – 172.31.255.255 | 172.16.0.0/12 | 1,048,576 |
| 192.168.0.0 – 192.168.255.255 | 192.168.0.0/16 | 65,536 |
Other special-purpose addresses
- 127.0.0.0/8 — loopback. 127.0.0.1 always means 'this host'.
- 169.254.0.0/16 — link-local (APIPA). A host self-assigns this when DHCP fails.
- 224.0.0.0/4 — multicast group addresses (used by routing protocols).
- 255.255.255.255 — limited broadcast (never crosses a router).
- 0.0.0.0/8 — 'this network' / unassigned.
- 192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24 — TEST-NET, safe for documentation.
- 100.64.0.0/10 — shared address space (RFC 6598). Providers use it between their carrier-grade NAT and customers' routers. It is not RFC 1918 space, and it is not public either.
- 240.0.0.0/4 — reserved, the old Class E. Not used on hosts or in routes; 255.255.255.255 at its very top is the limited broadcast.
6 more sections in this chapter, plus a 4-question quiz and a hands-on lab.
Modules 2–8 are part of the Course & Lab Pass and All-Access Max — start with a free account
You can see the title, summary, learning objectives and the opening sections. The rest of this chapter, like all of modules 2–8, comes with the Course & Lab Pass and All-Access Max. A free account opens Module 1: How Networks Work end-to-end and saves your labs — start there, no card required.
- Read every chapter in Module 1 — How Networks Work
- Save labs of up to 5 devices
- Save up to 3 topologies
- See the full course syllabus + chapter titles
Free account · no card required · compare plans any time